|
OSG Corporation's FTO-M-GDXL Drills expanded operations area for revolutionary extra long drills. Non step drilling up to 20 diameters deep in mold steels with hardness up to 46 HRC is possible now!
 These drills have been designed to meet special requirements of mold manufacturers.
Tool | FTO-M-GDXL D=6mm | Work Material | S50C, DIN CK50, AISI 1049 | Drilling Speed | 80m/min（4,246min－1） | Feed | 849mm/min（0.2mm/rev） | Depth of Holes | 120mm（20D）Blind Hole | Machine | Vertical Machining Center | Over 740 holes! | Drill for pilot hole | FTO-PLT φ6.03 | Drilling Speed | 80m/min（4,246min－1） | Feed | 849mm/min（0.2mm/rev） | Depth of Holes | 6mm |
Tool | FTO-M-GDXL φ4 | Work Material | SKD61（40HRC）, DIN X40CrMoV51, ASTM H13 | Drilling Speed | 40m/min（3,183min－1） | Feed | 849mm/min（0.2mm/rev） | Depth of Holes | 80mm（20D）Blind Hole | Machine | Horizontal Machining Center | Drill in good shape after 196 holes! |
|
